Boost.Interprocess presents two types of synchronization objects:

Each type has it's own advantages and disadvantages:

The main interface difference between named and anonymous utilities are the constructors. Usually anonymous utilities have only one constructor, whereas the named utilities have several constructors whose first argument is a special type that requests creation, opening or opening or creation of the underlying resource:

using namespace boost::interprocess;

//Create the synchronization utility. If it previously
//exists, throws an error
NamedUtility(create_only, ...)

//Open the synchronization utility. If it does not previously
//exist, it's created.
NamedUtility(open_or_create, ...)

//Open the synchronization utility. If it does not previously
//exist, throws an error.
NamedUtility(open_only, ...)

On the other hand the anonymous synchronization utility can only be created and the processes must synchronize using other mechanisms who creates the utility:

using namespace boost::interprocess;

//Create the synchronization utility.
AnonymousUtility(...)

Apart from its named/anonymous nature, Boost.Interprocess presents the following synchronization utilities:

Mutex stands for mutual exclusion and it's the most basic form of synchronization between processes. Mutexes guarantee that only one thread can lock a given mutex. If a code section is surrounded by a mutex locking and unlocking, it's guaranteed that only a thread at a time executes that section of code. When that thread unlocks the mutex, other threads can enter to that code region:

//The mutex has been previously constructed

lock_the_mutex();

//This code will be executed only by one thread
//at a time.

unlock_the_mutex();

A mutex can also be recursive or non-recursive:

All the mutex types from Boost.Interprocess implement the following operations:

Effects: The calling thread tries to obtain ownership of the mutex, and if another thread has ownership of the mutex, it waits until it can obtain the ownership. If a thread takes ownership of the mutex the mutex must be unlocked by the same thread. If the mutex supports recursive locking, the mutex must be unlocked the same number of times it is locked.

Throws: interprocess_exception on error.

Effects: The calling thread tries to obtain ownership of the mutex, and if another thread has ownership of the mutex returns immediately. If the mutex supports recursive locking, the mutex must be unlocked the same number of times it is locked.

Returns: If the thread acquires ownership of the mutex, returns true, if the another thread has ownership of the mutex, returns false.

Throws: interprocess_exception on error.

Effects: The calling thread will try to obtain exclusive ownership of the mutex if it can do so in until the specified time is reached. If the mutex supports recursive locking, the mutex must be unlocked the same number of times it is locked.

Returns: If the thread acquires ownership of the mutex, returns true, if the timeout expires returns false.

Throws: interprocess_exception on error.

Precondition: The thread must have exclusive ownership of the mutex.

Effects: The calling thread releases the exclusive ownership of the mutex. If the mutex supports recursive locking, the mutex must be unlocked the same number of times it is locked.

Throws: An exception derived from interprocess_exception on error.

	Important
	Boost.Interprocess timed synchronization mechanisms support several timepoints: boost::posix_time::ptime absolute UTC time points, boost::chrono and std::chrono timepoints. Additionally Interprocess' mutexes meet standard C++ TimedLockable requirements for std-compatibility

Boost.Interprocess offers the following mutex types:

#include <boost/interprocess/sync/interprocess_mutex.hpp>

#include <boost/interprocess/sync/interprocess_recursive_mutex.hpp>

#include <boost/interprocess/sync/named_mutex.hpp>

#include <boost/interprocess/sync/named_recursive_mutex.hpp>

It's very important to unlock a mutex after the process has read or written the data. This can be difficult when dealing with exceptions, so usually mutexes are used with a scoped lock, a class that can guarantee that a mutex will always be unlocked even when an exception occurs. To use a scoped lock just include:

#include <boost/interprocess/sync/scoped_lock.hpp>

Basically, a scoped lock calls unlock() in its destructor, and a mutex is always unlocked when an exception occurs. Scoped lock has many constructors to lock, try_lock, timed_lock a mutex or not to lock it at all.

using namespace boost::interprocess;

//Let's create any mutex type:
MutexType mutex;

{
   //This will lock the mutex
   scoped_lock<MutexType> lock(mutex);

   //Some code

   //The mutex will be unlocked here
}

{
   //This will try_lock the mutex
   scoped_lock<MutexType> lock(mutex, try_to_lock);

   //Check if the mutex has been successfully locked
   if(lock){
      //Some code
   }

   //If the mutex was locked it will be unlocked
}

{
   boost::posix_time::ptime abs_time = ...

   //This will timed_lock the mutex
   scoped_lock<MutexType> lock(mutex, abs_time);

   //Check if the mutex has been successfully locked
   if(lock){
      //Some code
   }

   //If the mutex was locked it will be unlocked
}

For more information, check the scoped_lock's reference.

	Important
	Boost.Interprocess timed synchronization operations support several timepoints: boost::posix_time::ptime absolute UTC time points, boost::chrono and std::chrono timepoints

Imagine that two processes need to write traces to a cyclic buffer built in shared memory. Each process needs to obtain exclusive access to the cyclic buffer, write the trace and continue.

To protect the cyclic buffer, we can store a process shared mutex in the cyclic buffer. Each process will lock the mutex before writing the data and will write a flag when ends writing the traces (doc_anonymous_mutex_shared_data.hpp header):

#include <boost/interprocess/sync/interprocess_mutex.hpp>

struct shared_memory_log
{
   enum { NumItems = 100 };
   enum { LineSize = 100 };

   shared_memory_log()
      :  current_line(0)
      ,  end_a(false)
      ,  end_b(false)
   {}

   //Mutex to protect access to the queue
   boost::interprocess::interprocess_mutex mutex;

   //Items to fill
   char   items[NumItems][LineSize];
   int    current_line;
   bool   end_a;
   bool   end_b;
};

This is the process main process. Creates the shared memory, constructs the cyclic buffer and start writing traces:

#include <boost/interprocess/shared_memory_object.hpp>
#include <boost/interprocess/mapped_region.hpp>
#include <boost/interprocess/sync/scoped_lock.hpp>
#include "doc_anonymous_mutex_shared_data.hpp"
#include <iostream>
#include <cstdio>

using namespace boost::interprocess;

int main ()
{
   BOOST_TRY{
      //Remove shared memory on construction and destruction
      struct shm_remove
      {
         shm_remove() { shared_memory_object::remove("MySharedMemory"); }
         ~shm_remove(){ shared_memory_object::remove("MySharedMemory"); }
      } remover;

      //Create a shared memory object.
      shared_memory_object shm
         (create_only               //only create
         ,"MySharedMemory"          //name
         ,read_write   //read-write mode
         );

      //Set size
      shm.truncate(sizeof(shared_memory_log));

      //Map the whole shared memory in this process
      mapped_region region
         (shm                       //What to map
         ,read_write   //Map it as read-write
         );

      //Get the address of the mapped region
      void * addr       = region.get_address();

      //Construct the shared structure in memory
      shared_memory_log * data = new (addr) shared_memory_log;

      //Write some logs
      for(int i = 0; i < shared_memory_log::NumItems; ++i){
         //Lock the mutex
         scoped_lock<interprocess_mutex> lock(data->mutex);
         std::sprintf(data->items[(data->current_line++) % shared_memory_log::NumItems]
                  ,"%s_%d", "process_a", i);
         if(i == (shared_memory_log::NumItems-1))
            data->end_a = true;
         //Mutex is released here
      }

      //Wait until the other process ends
      while(1){
         scoped_lock<interprocess_mutex> lock(data->mutex);
         if(data->end_b)
            break;
      }
   }
   BOOST_CATCH(interprocess_exception &ex){
      std::cout << ex.what() << std::endl;
      return 1;
   } BOOST_CATCH_END
   return 0;
}

The second process opens the shared memory, obtains access to the cyclic buffer and starts writing traces:

#include <boost/interprocess/shared_memory_object.hpp>
#include <boost/interprocess/mapped_region.hpp>
#include <boost/interprocess/sync/scoped_lock.hpp>
#include "doc_anonymous_mutex_shared_data.hpp"
#include <iostream>
#include <cstdio>

using namespace boost::interprocess;

int main ()
{
   //Remove shared memory on destruction
   struct shm_remove
   {
      ~shm_remove(){ shared_memory_object::remove("MySharedMemory"); }
   } remover;

   //Open the shared memory object.
   shared_memory_object shm
      (open_only                    //only create
      ,"MySharedMemory"              //name
      ,read_write  //read-write mode
      );

   //Map the whole shared memory in this process
   mapped_region region
      (shm                       //What to map
      ,read_write //Map it as read-write
      );

   //Get the address of the mapped region
   void * addr       = region.get_address();

   //Construct the shared structure in memory
   shared_memory_log * data = static_cast<shared_memory_log*>(addr);

   //Write some logs
   for(int i = 0; i < 100; ++i){
      //Lock the mutex
      scoped_lock<interprocess_mutex> lock(data->mutex);
      std::sprintf(data->items[(data->current_line++) % shared_memory_log::NumItems]
               ,"%s_%d", "process_a", i);
      if(i == (shared_memory_log::NumItems-1))
         data->end_b = true;
      //Mutex is released here
   }

   //Wait until the other process ends
   while(1){
      scoped_lock<interprocess_mutex> lock(data->mutex);
      if(data->end_a)
         break;
   }
   return 0;
}

As we can see, a mutex is useful to protect data but not to notify an event to another process. For this, we need a condition variable, as we will see in the next section.

Now imagine that two processes want to write a trace to a file. First they write their name, and after that they write the message. Since the operating system can interrupt a process in any moment we can mix parts of the messages of both processes, so we need a way to write the whole message to the file atomically. To achieve this, we can use a named mutex so that each process locks the mutex before writing:

#include <boost/interprocess/sync/scoped_lock.hpp>
#include <boost/interprocess/sync/named_mutex.hpp>
#include <fstream>
#include <iostream>
#include <cstdio>


int main ()
{
   using namespace boost::interprocess;
   BOOST_TRY{
      struct file_remove
      {
         file_remove() { std::remove("file_name"); }
         ~file_remove(){ std::remove("file_name"); }
      } file_remover;
      struct mutex_remove
      {
         mutex_remove() { named_mutex::remove("fstream_named_mutex"); }
         ~mutex_remove(){ named_mutex::remove("fstream_named_mutex"); }
      } remover;

      //Open or create the named mutex
      named_mutex mutex(open_or_create, "fstream_named_mutex");

      std::ofstream file("file_name");

      for(int i = 0; i < 10; ++i){

         //Do some operations...

         //Write to file atomically
         scoped_lock<named_mutex> lock(mutex);
         file << "Process name, ";
         file << "This is iteration #" << i;
         file << std::endl;
      }
   }
   BOOST_CATCH(interprocess_exception &ex){
      std::cout << ex.what() << std::endl;
      return 1;
   } BOOST_CATCH_END
   return 0;
}

In the previous example, a mutex is used to lock but we can't use it to wait efficiently until the condition to continue is met. A condition variable can do two things:

Waiting in a condition variable is always associated with a mutex. The mutex must be locked prior to waiting on the condition. When waiting on the condition variable, the thread unlocks the mutex and waits atomically.

When the thread returns from a wait function (because of a signal or a timeout, for example) the mutex object is again locked.

Boost.Interprocess offers the following condition types:

#include <boost/interprocess/sync/interprocess_condition.hpp>

#include <boost/interprocess/sync/interprocess_condition_any.hpp>

#include <boost/interprocess/sync/named_condition.hpp>

#include <boost/interprocess/sync/named_condition_any.hpp>

Named conditions are similar to anonymous conditions, but they are used in combination with named mutexes. Several times, we don't want to store synchronization objects with the synchronized data:

Imagine that a process that writes a trace to a simple shared memory buffer that another process prints one by one. The first process writes the trace and waits until the other process prints the data. To achieve this, we can use two condition variables: the first one is used to block the sender until the second process prints the message and the second one to block the receiver until the buffer has a trace to print.

The shared memory trace buffer (doc_anonymous_condition_shared_data.hpp):

#include <boost/interprocess/sync/interprocess_mutex.hpp>
#include <boost/interprocess/sync/interprocess_condition.hpp>

struct trace_queue
{
   enum { LineSize = 100 };

   trace_queue()
      :  message_in(false)
   {}

   //Mutex to protect access to the queue
   boost::interprocess::interprocess_mutex      mutex;

   //Condition to wait when the queue is empty
   boost::interprocess::interprocess_condition  cond_empty;

   //Condition to wait when the queue is full
   boost::interprocess::interprocess_condition  cond_full;

   //Items to fill
   char   items[LineSize];

   //Is there any message
   bool message_in;
};

This is the process main process. Creates the shared memory, places there the buffer and starts writing messages one by one until it writes "last message" to indicate that there are no more messages to print:

#include <boost/interprocess/shared_memory_object.hpp>
#include <boost/interprocess/mapped_region.hpp>
#include <boost/interprocess/sync/scoped_lock.hpp>
#include <iostream>
#include <cstdio>
#include "doc_anonymous_condition_shared_data.hpp"

using namespace boost::interprocess;

int main ()
{

   //Erase previous shared memory and schedule erasure on exit
   struct shm_remove
   {
      shm_remove() { shared_memory_object::remove("MySharedMemory"); }
      ~shm_remove(){ shared_memory_object::remove("MySharedMemory"); }
   } remover;

   //Create a shared memory object.
   shared_memory_object shm
      (create_only               //only create
      ,"MySharedMemory"           //name
      ,read_write                //read-write mode
      );
   BOOST_TRY{
      //Set size
      shm.truncate(sizeof(trace_queue));

      //Map the whole shared memory in this process
      mapped_region region
         (shm                       //What to map
         ,read_write //Map it as read-write
         );

      //Get the address of the mapped region
      void * addr       = region.get_address();

      //Construct the shared structure in memory
      trace_queue * data = new (addr) trace_queue;

      const int NumMsg = 100;

      for(int i = 0; i < NumMsg; ++i){
         scoped_lock<interprocess_mutex> lock(data->mutex);
         if(data->message_in){
            data->cond_full.wait(lock);
         }
         if(i == (NumMsg-1))
            std::sprintf(data->items, "%s", "last message");
         else
            std::sprintf(data->items, "%s_%d", "my_trace", i);

         //Notify to the other process that there is a message
         data->cond_empty.notify_one();

         //Mark message buffer as full
         data->message_in = true;
      }
   }
   BOOST_CATCH(interprocess_exception &ex){
      std::cout << ex.what() << std::endl;
      return 1;
   } BOOST_CATCH_END

   return 0;
}

The second process opens the shared memory and prints each message until the "last message" message is received:

#include <boost/interprocess/shared_memory_object.hpp>
#include <boost/interprocess/mapped_region.hpp>
#include <boost/interprocess/sync/scoped_lock.hpp>
#include <iostream>
#include <cstring>
#include "doc_anonymous_condition_shared_data.hpp"

using namespace boost::interprocess;

int main ()
{
   //Create a shared memory object.
   shared_memory_object shm
      (open_only                    //only create
      ,"MySharedMemory"              //name
      ,read_write                   //read-write mode
      );

   BOOST_TRY{
      //Map the whole shared memory in this process
      mapped_region region
         (shm                       //What to map
         ,read_write //Map it as read-write
         );

      //Get the address of the mapped region
      void * addr       = region.get_address();

      //Obtain a pointer to the shared structure
      trace_queue * data = static_cast<trace_queue*>(addr);

      //Print messages until the other process marks the end
      bool end_loop = false;
      do{
         scoped_lock<interprocess_mutex> lock(data->mutex);
         if(!data->message_in){
            data->cond_empty.wait(lock);
         }
         if(std::strcmp(data->items, "last message") == 0){
            end_loop = true;
         }
         else{
            //Print the message
            std::cout << data->items << std::endl;
            //Notify the other process that the buffer is empty
            data->message_in = false;
            data->cond_full.notify_one();
         }
      }
      while(!end_loop);
   }
   BOOST_CATCH(interprocess_exception &ex){
      std::cout << ex.what() << std::endl;
      return 1;
   } BOOST_CATCH_END

   return 0;
}

With condition variables, a process can block if it can't continue the work, and when the conditions to continue are met another process can wake it.

A semaphore is a synchronization mechanism between processes based in an internal count that offers two basic operations:

If the initial semaphore count is initialized to 1, a Wait operation is equivalent to a mutex locking and Post is equivalent to a mutex unlocking. This type of semaphore is known as a binary semaphore.

Although semaphores can be used like mutexes, they have a unique feature: unlike mutexes, a Post operation need not be executed by the same thread/process that executed the Wait operation.

Boost.Interprocess offers the following semaphore types:

#include <boost/interprocess/sync/interprocess_semaphore.hpp>

#include <boost/interprocess/sync/named_semaphore.hpp>

We will implement an integer array in shared memory that will be used to transfer data from one process to another process. The first process will write some integers to the array and the process will block if the array is full.

The second process will copy the transmitted data to its own buffer, blocking if there is no new data in the buffer.

This is the shared integer array (doc_anonymous_semaphore_shared_data.hpp):

#include <boost/interprocess/sync/interprocess_semaphore.hpp>

struct shared_memory_buffer
{
   enum { NumItems = 10 };

   shared_memory_buffer()
      : mutex(1), nempty(NumItems), nstored(0)
   {}

   //Semaphores to protect and synchronize access
   boost::interprocess::interprocess_semaphore
      mutex, nempty, nstored;

   //Items to fill
   int items[NumItems];
};

This is the process main process. Creates the shared memory, places there the integer array and starts integers one by one, blocking if the array is full:

#include <boost/interprocess/shared_memory_object.hpp>
#include <boost/interprocess/mapped_region.hpp>
#include <iostream>
#include "doc_anonymous_semaphore_shared_data.hpp"

using namespace boost::interprocess;

int main ()
{
   //Remove shared memory on construction and destruction
   struct shm_remove
   {
      shm_remove() { shared_memory_object::remove("MySharedMemory"); }
      ~shm_remove(){ shared_memory_object::remove("MySharedMemory"); }
   } remover;

   //Create a shared memory object.
   shared_memory_object shm
      (create_only                  //only create
      ,"MySharedMemory"              //name
      ,read_write  //read-write mode
      );

   //Set size
   shm.truncate(sizeof(shared_memory_buffer));

   //Map the whole shared memory in this process
   mapped_region region
      (shm                       //What to map
      ,read_write //Map it as read-write
      );

   //Get the address of the mapped region
   void * addr       = region.get_address();

   //Construct the shared structure in memory
   shared_memory_buffer * data = new (addr) shared_memory_buffer;

   const int NumMsg = 100;

   //Insert data in the array
   for(int i = 0; i < NumMsg; ++i){
      data->nempty.wait();
      data->mutex.wait();
      data->items[i % shared_memory_buffer::NumItems] = i;
      data->mutex.post();
      data->nstored.post();
   }

   return 0;
}

The second process opens the shared memory and copies the received integers to it's own buffer:

#include <boost/interprocess/shared_memory_object.hpp>
#include <boost/interprocess/mapped_region.hpp>
#include <iostream>
#include "doc_anonymous_semaphore_shared_data.hpp"

using namespace boost::interprocess;

int main ()
{
   //Remove shared memory on destruction
   struct shm_remove
   {
      ~shm_remove(){ shared_memory_object::remove("MySharedMemory"); }
   } remover;

   //Create a shared memory object.
   shared_memory_object shm
      (open_only                    //only open
      ,"MySharedMemory"              //name
      ,read_write  //read-write mode
      );

   //Map the whole shared memory in this process
   mapped_region region
      (shm                       //What to map
      ,read_write //Map it as read-write
      );

   //Get the address of the mapped region
   void * addr       = region.get_address();

   //Obtain the shared structure
   shared_memory_buffer * data = static_cast<shared_memory_buffer*>(addr);

   const int NumMsg = 100;

   int extracted_data [NumMsg];

   //Extract the data
   for(int i = 0; i < NumMsg; ++i){
      data->nstored.wait();
      data->mutex.wait();
      extracted_data[i] = data->items[i % shared_memory_buffer::NumItems];
      data->mutex.post();
      data->nempty.post();
   }
   return 0;
}

The same interprocess communication can be achieved with a condition variables and mutexes, but for several synchronization patterns, a semaphore is more efficient than a mutex/condition combination.

Sharable and upgradable mutex are special mutex types that offers more locking possibilities than a normal mutex. Sometimes, we can distinguish between reading the data and modifying the data. If just some threads need to modify the data, and a plain mutex is used to protect the data from concurrent access, concurrency is pretty limited: two threads that only read the data will be serialized instead of being executed concurrently.

If we allow concurrent access to threads that just read the data but we avoid concurrent access between threads that read and modify or between threads that modify, we can increase performance. This is specially true in applications where data reading is more common than data modification and the synchronized data reading code needs some time to execute. With a sharable mutex we can acquire 2 lock types:

With an upgradable mutex we can acquire previous locks plus a new upgradable lock:

To sum up:

A sharable mutex has no option to change the acquired lock for another lock atomically.

On the other hand, for an upgradable mutex, a thread that has acquired a lock can try to acquire another lock type atomically. All lock transitions are not guaranteed to succeed. Even if a transition is guaranteed to succeed, some transitions will block the thread waiting until other threads release the sharable locks. Atomically means that no other thread will acquire an Upgradable or Exclusive lock in the transition, so data is guaranteed to remain unchanged:

As we can see, an upgradable mutex is a powerful synchronization utility that can improve the concurrency. However, if most of the time we have to modify the data, or the synchronized code section is very short, it's more efficient to use a plain mutex, since it has less overhead. Upgradable lock shines when the synchronized code section is bigger and there are more readers than modifiers.

All the upgradable mutex types from Boost.Interprocess implement the following operations:

Promotions (Upgradable Mutex only)

void unlock_upgradable_and_lock()

Precondition: The thread must have upgradable ownership of the mutex.

Effects: The thread atomically releases upgradable ownership and acquires exclusive ownership. This operation will block until all threads with sharable ownership release it.

Throws: An exception derived from interprocess_exception on error.

bool try_unlock_upgradable_and_lock()

Precondition: The thread must have upgradable ownership of the mutex.

Effects: The thread atomically releases upgradable ownership and tries to acquire exclusive ownership. This operation will fail if there are threads with sharable ownership, but it will maintain upgradable ownership.

Returns: If acquires exclusive ownership, returns true. Otherwise returns false.

Throws: An exception derived from interprocess_exception on error.

template <class TimePoint> bool timed_unlock_upgradable_and_lock(const TimePoint &abs_time)

Precondition: The thread must have upgradable ownership of the mutex.

Effects: The thread atomically releases upgradable ownership and tries to acquire exclusive ownership, waiting if necessary until abs_time. This operation will fail if there are threads with sharable ownership or timeout reaches, but it will maintain upgradable ownership.

Returns: If acquires exclusive ownership, returns true. Otherwise returns false.

Throws: An exception derived from interprocess_exception on error.

bool try_unlock_sharable_and_lock()

Precondition: The thread must have sharable ownership of the mutex.

Effects: The thread atomically releases sharable ownership and tries to acquire exclusive ownership. This operation will fail if there are threads with sharable or upgradable ownership, but it will maintain sharable ownership.

Returns: If acquires exclusive ownership, returns true. Otherwise returns false.

Throws: An exception derived from interprocess_exception on error.

bool try_unlock_sharable_and_lock_upgradable()

Precondition: The thread must have sharable ownership of the mutex.

Effects: The thread atomically releases sharable ownership and tries to acquire upgradable ownership. This operation will fail if there are threads with sharable or upgradable ownership, but it will maintain sharable ownership.

Returns: If acquires upgradable ownership, returns true. Otherwise returns false.

Throws: An exception derived from interprocess_exception on error.

	Important
	Boost.Interprocess timed synchronization mechanisms support several timepoints: boost::posix_time::ptime absolute UTC time points, boost::chrono and std::chrono timepoints.

Boost.Interprocess offers the following sharable mutex types:

#include <boost/interprocess/sync/interprocess_sharable_mutex.hpp>

#include <boost/interprocess/sync/named_sharable_mutex.hpp>

Boost.Interprocess offers the following upgradable mutex types:

#include <boost/interprocess/sync/interprocess_upgradable_mutex.hpp>

#include <boost/interprocess/sync/named_upgradable_mutex.hpp>

	Important
	Interprocess shared mutexes meet standard C++ SharedTimedMutex requirements for std-compatibility

As with plain mutexes, it's important to release the acquired lock even in the presence of exceptions. Boost.Interprocess mutexes are best used with the scoped_lock utility, and this class only offers exclusive locking.

As we have sharable locking and upgradable locking with upgradable mutexes, we have two new utilities: sharable_lock and upgradable_lock. Both classes are similar to scoped_lock but sharable_lock acquires the sharable lock in the constructor and upgradable_lock acquires the upgradable lock in the constructor.

These two utilities can be use with any synchronization object that offers the needed operations. For example, a user defined mutex type with no upgradable locking features can use sharable_lock if the synchronization object offers lock_sharable() and unlock_sharable() operations:

#include <boost/interprocess/sync/sharable_lock.hpp>

#include <boost/interprocess/sync/upgradable_lock.hpp>

sharable_lock calls unlock_sharable() in its destructor, and upgradable_lock calls unlock_upgradable() in its destructor, so the upgradable mutex is always unlocked when an exception occurs.

using namespace boost::interprocess;

SharableOrUpgradableMutex sh_or_up_mutex;

{
   //This will call lock_sharable()
   sharable_lock<SharableOrUpgradableMutex> lock(sh_or_up_mutex);

   //Some code

   //The mutex will be unlocked here
}

{
   //This won't lock the mutex()
   sharable_lock<SharableOrUpgradableMutex> lock(sh_or_up_mutex, defer_lock);

   //Lock it on demand. This will call lock_sharable()
   lock.lock();

   //Some code

   //The mutex will be unlocked here
}

{
   //This will call try_lock_sharable()
   sharable_lock<SharableOrUpgradableMutex> lock(sh_or_up_mutex, try_to_lock);

   //Check if the mutex has been successfully locked
   if(lock){
      //Some code
   }
   //If the mutex was locked it will be unlocked
}

{
   boost::posix_time::ptime abs_time = ...

   //This will call timed_lock_sharable()
   scoped_lock<SharableOrUpgradableMutex> lock(sh_or_up_mutex, abs_time);

   //Check if the mutex has been successfully locked
   if(lock){
      //Some code
   }
   //If the mutex was locked it will be unlocked
}

UpgradableMutex up_mutex;

{
   //This will call lock_upgradable()
   upgradable_lock<UpgradableMutex> lock(up_mutex);

   //Some code

   //The mutex will be unlocked here
}

{
   //This won't lock the mutex()
   upgradable_lock<UpgradableMutex> lock(up_mutex, defer_lock);

   //Lock it on demand. This will call lock_upgradable()
   lock.lock();

   //Some code

   //The mutex will be unlocked here
}

{
   //This will call try_lock_upgradable()
   upgradable_lock<UpgradableMutex> lock(up_mutex, try_to_lock);

   //Check if the mutex has been successfully locked
   if(lock){
      //Some code
   }
   //If the mutex was locked it will be unlocked
}

{
   boost::posix_time::ptime abs_time = ...

   //This will call timed_lock_upgradable()
   scoped_lock<UpgradableMutex> lock(up_mutex, abs_time);

   //Check if the mutex has been successfully locked
   if(lock){
      //Some code
   }
   //If the mutex was locked it will be unlocked
}

upgradable_lock and sharable_lock offer more features and operations, see their reference for more informations

	Important
	Boost.Interprocess timed synchronization mechanisms support several timepoints: boost::posix_time::ptime absolute UTC time points, boost::chrono and std::chrono timepoints.

Imagine that a thread modifies some data in the beginning but after that, it has to just read it in a long time. The code can acquire the exclusive lock, modify the data and atomically release the exclusive lock and acquire the sharable lock. With these sequence we guarantee that no other thread can modify the data in the transition and that more readers can acquire sharable lock, increasing concurrency. Without lock transfer operations, this would be coded like this:

using boost::interprocess;
interprocess_upgradable_mutex mutex;

//Acquire exclusive lock
mutex.lock();

//Modify data

//Atomically release exclusive lock and acquire sharable lock.
//More threads can acquire the sharable lock and read the data.
mutex.unlock_and_lock_sharable();

//Read data

//Explicit unlocking
mutex.unlock_sharable();

This can be simple, but in the presence of exceptions, it's complicated to know what type of lock the mutex had when the exception was thrown and what function we should call to unlock it:

BOOST_TRY{
   //Mutex operations
}
BOOST_CATCH(...){
   //What should we call? "unlock()" or "unlock_sharable()"
   //Is the mutex locked?
} BOOST_CATCH_END

We can use lock transfer to simplify all this management:

using boost::interprocess;
interprocess_upgradable_mutex mutex;

//Acquire exclusive lock
scoped_lock s_lock(mutex);

//Modify data

//Atomically release exclusive lock and acquire sharable lock.
//More threads can acquire the sharable lock and read the data.
sharable_lock(move(s_lock));

//Read data

//The lock is automatically unlocked calling the appropriate unlock
//function even in the presence of exceptions.
//If the mutex was not locked, no function is called.

As we can see, even if an exception is thrown at any moment, the mutex will be automatically unlocked calling the appropriate unlock() or unlock_sharable() method.

There are many lock transfer operations that we can classify according to the operations presented in the upgradable mutex operations:

Transfers To Scoped Lock

Transfers to scoped_lock are guaranteed to succeed only from an upgradable_lock and only if a blocking operation is requested, due to the fact that this operation needs to wait until all sharable locks are released. The user can also use "try" or "timed" transfer to avoid infinite locking, but succeed is not guaranteed.

A conversion from a sharable_lock is never guaranteed and thus, only a try operation is permitted:

//Conversions to scoped_lock
{
   upgradable_lock<Mutex>  u_lock(mut);
   //This calls unlock_upgradable_and_lock()
   scoped_lock<Mutex>      e_lock(move(u_lock));
}
{
   upgradable_lock<Mutex>  u_lock(mut);
   //This calls try_unlock_upgradable_and_lock()
   scoped_lock<Mutex>      e_lock(move(u_lock, try_to_lock));
}
{
   using namespace boost::posix_time;
   upgradable_lock<Mutex>  u_lock(mut);
   ptime t = boost::date_time::microsec_clock<ptime>::universal_time() + milliseconds(100);
   //This calls timed_unlock_upgradable_and_lock()
   scoped_lock<Mutex>      e_lock(move(u_lock), t);
}
{
   sharable_lock<Mutex>    s_lock(mut);
   //This calls try_unlock_sharable_and_lock()
   scoped_lock<Mutex>      e_lock(move(s_lock, try_to_lock));
}

	Important
	Boost.Interprocess timed synchronization mechanisms support several timepoints: boost::posix_time::ptime absolute UTC time points, boost::chrono and std::chrono timepoints.

//Conversions to upgradable
{
   sharable_lock<Mutex>    s_lock(mut);
   //This calls try_unlock_sharable_and_lock_upgradable()
   upgradable_lock<Mutex>  u_lock(move(s_lock, try_to_lock));
}
{
   scoped_lock<Mutex>      e_lock(mut);
   //This calls unlock_and_lock_upgradable()
   upgradable_lock<Mutex>  u_lock(move(e_lock));
}

//Conversions to sharable_lock
{
   upgradable_lock<Mutex>  u_lock(mut);
   //This calls unlock_upgradable_and_lock_sharable()
   sharable_lock<Mutex>    s_lock(move(u_lock));
}
{
   scoped_lock<Mutex>      e_lock(mut);
   //This calls unlock_and_lock_sharable()
   sharable_lock<Mutex>    s_lock(move(e_lock));
}

In the previous examples, the mutex used in the transfer operation was previously locked:

   Mutex mut;

   //This calls mut.lock()
   scoped_lock<Mutex>      e_lock(mut);

   //This calls unlock_and_lock_sharable()
   sharable_lock<Mutex>    s_lock(move(e_lock));
}

but it's possible to execute the transfer with an unlocked source, due to explicit unlocking, a try, timed or a defer_lock constructor:

//These operations can leave the mutex unlocked!

{
   //Try might fail
   scoped_lock<Mutex>      e_lock(mut, try_to_lock);
   sharable_lock<Mutex>    s_lock(move(e_lock));
}
{
   //Timed operation might fail
   scoped_lock<Mutex>      e_lock(mut, time);
   sharable_lock<Mutex>    s_lock(move(e_lock));
}
{
   //Avoid mutex locking
   scoped_lock<Mutex>      e_lock(mut, defer_lock);
   sharable_lock<Mutex>    s_lock(move(e_lock));
}
{
   //Explicitly call unlock
   scoped_lock<Mutex>      e_lock(mut);
   e_lock.unlock();
   //Mutex was explicitly unlocked
   sharable_lock<Mutex>    s_lock(move(e_lock));
}

If the source mutex was not locked:

{
   scoped_lock<Mutex>      e_lock(mut, defer_lock);
   sharable_lock<Mutex>    s_lock(move(e_lock));

   //Assertions
   assert(e_lock.mutex() == 0);
   assert(s_lock.mutex() != 0);
   assert(e_lock.owns()  == false);
}

When executing a lock transfer, the operation can fail:

In the first case, the mutex ownership is not transferred and the source lock's destructor will unlock the mutex:

{
   scoped_lock<Mutex>      e_lock(mut, defer_lock);

   //This operations throws because
   //"unlock_and_lock_sharable()" throws!!!
   sharable_lock<Mutex>    s_lock(move(e_lock));

   //Some code ...

   //e_lock's destructor will call "unlock()"
}

In the second case, if an internal "try" or "timed" operation fails (returns "false") then the mutex ownership is not transferred, the source lock is unchanged and the target lock's state will the same as a default construction:

{
   sharable_lock<Mutex>    s_lock(mut);

   //Internal "try_unlock_sharable_and_lock_upgradable()" returns false
   upgradable_lock<Mutex>  u_lock(move(s_lock, try_to_lock));

   assert(s_lock.mutex() == &mut);
   assert(s_lock.owns()  == true);
   assert(u_lock.mutex() == 0);
   assert(u_lock.owns()  == false);

   //u_lock's destructor does nothing
   //s_lock's destructor calls "unlock()"
}

A file lock is an interprocess synchronization mechanism to protect concurrent writes and reads to files using a mutex embedded in the file. This embedded mutex has sharable and exclusive locking capabilities. With a file lock, an existing file can be used as a mutex without the need of creating additional synchronization objects to control concurrent file reads or writes.

Generally speaking, we can have two file locking capabilities:

Boost.Interprocess uses the widely used native capability in each OS, which means:

In some systems file locking can be even further refined, leading to record locking, where a user can specify a byte range within the file where the lock is applied. This allows concurrent write access by several processes if they need to access a different byte range in the file. Boost.Interprocess does not offer record locking for the moment, but might offer it in the future. To use a file lock just include:

#include <boost/interprocess/sync/file_lock.hpp>

A file locking is a class that has process lifetime. This means that if a process holding a file lock ends or crashes, the operating system will automatically unlock it. This feature is very useful in some situations where we want to assure automatic unlocking even when the process crashes and avoid leaving blocked resources in the system. A file lock is constructed using the name of the file as an argument:

#include <boost/interprocess/sync/file_lock.hpp>

int main()
{
   //This throws if the file does not exist or it can't
   //open it with read-write access!
   boost::interprocess::file_lock flock("my_file");
   return 0;
}

File locking has normal mutex operations plus sharable locking capabilities. This means that we can have multiple readers holding the sharable lock and writers holding the exclusive lock waiting until the readers end their job.

However, file locking does not support upgradable locking or promotion or demotion (lock transfers), so it's more limited than an upgradable lock. These are the operations:

Effects: The calling thread tries to obtain exclusive ownership of the file lock, and if another thread has exclusive or sharable ownership of the mutex, it waits until it can obtain the ownership.

Throws: interprocess_exception on error.

Effects: The calling thread tries to acquire exclusive ownership of the file lock without waiting. If no other thread has exclusive or sharable ownership of the file lock, this succeeds.

Returns: If it can acquire exclusive ownership immediately returns true. If it has to wait, returns false.

Throws: interprocess_exception on error.

Effects: The calling thread tries to acquire exclusive ownership of the file lock waiting if necessary until no other thread has exclusive or sharable ownership of the file lock or abs_time is reached.

Returns: If acquires exclusive ownership, returns true. Otherwise returns false.

Throws: interprocess_exception on error.

Precondition: The thread must have exclusive ownership of the file lock.

Effects: The calling thread releases the exclusive ownership of the file lock.

Throws: An exception derived from interprocess_exception on error.

Effects: The calling thread tries to obtain sharable ownership of the file lock, and if another thread has exclusive ownership of the file lock, waits until it can obtain the ownership.

Throws: interprocess_exception on error.

Effects: The calling thread tries to acquire sharable ownership of the file lock without waiting. If no other thread has exclusive ownership of the file lock, this succeeds.

Returns: If it can acquire sharable ownership immediately returns true. If it has to wait, returns false.

Throws: interprocess_exception on error.

Effects: The calling thread tries to acquire sharable ownership of the file lock waiting if necessary until no other thread has exclusive ownership of the file lock or abs_time is reached.

Returns: If acquires sharable ownership, returns true. Otherwise returns false.

Throws: interprocess_exception on error.

Precondition: The thread must have sharable ownership of the file lock.

Effects: The calling thread releases the sharable ownership of the file lock.

Throws: An exception derived from interprocess_exception on error.

For more file locking methods, please file_lock reference.

	Important
	Boost.Interprocess timed synchronization mechanisms support several timepoints: boost::posix_time::ptime absolute UTC time points, boost::chrono and std::chrono timepoints.

scoped_lock and sharable_lock can be used to make file locking easier in the presence of exceptions, just like with mutexes:

#include <boost/interprocess/sync/file_lock.hpp>
#include <boost/interprocess/sync/sharable_lock.hpp>
//...

using namespace boost::interprocess;
//This process reads the file
//    ...
//Open the file lock
file_lock f_lock("my_file");

{
   //Construct a sharable lock with the file lock.
   //This will call "f_lock.sharable_lock()".
   sharable_lock<file_lock> sh_lock(f_lock);

   //Now read the file...

   //The sharable lock is automatically released by
   //sh_lock's destructor
}

#include <boost/interprocess/sync/file_lock.hpp>
#include <boost/interprocess/sync/scoped_lock.hpp>

//...

using namespace boost::interprocess;
//This process writes the file
//    ...
//Open the file lock
file_lock f_lock("my_file");

{
   //Construct an exclusive lock with the file lock.
   //This will call "f_lock.lock()".
   scoped_lock<file_lock> e_lock(f_lock);

   //Now write the file...

   //The exclusive lock is automatically released by
   //e_lock's destructor
}

However, lock transfers are only allowed between same type of locks, that is, from a sharable lock to another sharable lock or from a scoped lock to another scoped lock. A transfer from a scoped lock to a sharable lock is not allowed, because file_lock has no lock promotion or demotion functions like unlock_and_lock_sharable(). This will produce a compilation error:

//Open the file lock
file_lock f_lock("my_file");

scoped_lock<file_lock> e_lock(f_lock);

//Compilation error, f_lock has no "unlock_and_lock_sharable()" member!
sharable_lock<file_lock> e_lock(move(f_lock));

If you plan to use file locks just like named mutexes, be careful, because portable file locks have synchronization limitations, mainly because different implementations (POSIX, Windows) offer different guarantees. Interprocess file locks have the following limitations:

The first limitation comes mainly from POSIX, since a file handle is a per-process attribute and not a per-thread attribute. This means that if a thread uses a file_lock object to lock a file, other threads will see the file as locked. Windows file locking mechanism, on the other hand, offer thread-synchronization guarantees so a thread trying to lock the already locked file, would block.

The second limitation comes from the fact that file locking synchronization state is tied with a single file descriptor in Windows. This means that if two file_lock objects are created pointing to the same file, no synchronization is guaranteed. In POSIX, when two file descriptors are used to lock a file if a descriptor is closed, all file locks set by the calling process are cleared.

To sum up, if you plan to use portable file locking in your processes, use the following restrictions:

As we've seen file locking can be useful to synchronize two processes, but make sure data is written to the file before unlocking the file lock. Take in care that iostream classes do some kind of buffering, so if you want to make sure that other processes can see the data you've written, you have the following alternatives:

//...

using namespace boost::interprocess;
//This process writes the file
//    ...
//Open the file lock
fstream file("my_file")
file_lock f_lock("my_lock_file");

{
   scoped_lock<file_lock> e_lock(f_lock);

   //Now write the file...

   //Flush data before unlocking the exclusive lock
   file.flush();
}

A message queue is similar to a list of messages. Threads can put messages in the queue and they can also remove messages from the queue. Each message can have also a priority so that higher priority messages are read before lower priority messages. Each message has some attributes:

A thread can send a message to or receive a message from the message queue using 3 methods:

A message queue just copies raw bytes between processes and does not send objects. This means that if we want to send an object using a message queue the object must be binary serializable. For example, we can send integers between processes but not a std::string. You should use Boost.Serialization or use advanced Boost.Interprocess mechanisms to send complex data between processes.

The Boost.Interprocess message queue is a named interprocess communication: the message queue is created with a name and it's opened with a name, just like a file. When creating a message queue, the user must specify the maximum message size and the maximum message number that the message queue can store. These parameters will define the resources (for example the size of the shared memory used to implement the message queue if shared memory is used).

using boost::interprocess;
//Create a message_queue. If the queue
//exists throws an exception
message_queue mq
   (create_only         //only create
   ,"message_queue"     //name
   ,100                 //max message number
   ,100                 //max message size
   );

using boost::interprocess;
//Creates or opens a message_queue. If the queue
//does not exist creates it, otherwise opens it.
//Message number and size are ignored if the queue
//is opened
message_queue mq
   (open_or_create      //open or create
   ,"message_queue"     //name
   ,100                 //max message number
   ,100                 //max message size
   );

using boost::interprocess;
//Opens a message_queue. If the queue
//does not exist throws an exception.
message_queue mq
   (open_only           //only open
   ,"message_queue"     //name
   );

The message queue is explicitly removed calling the static remove function:

using boost::interprocess;
message_queue::remove("message_queue");

The function can fail if the message queue is still being used by any process.

To use a message queue you must include the following header:

#include <boost/interprocess/ipc/message_queue.hpp>

In the following example, the first process creates the message queue, and writes an array of integers on it. The other process just reads the array and checks that the sequence number is correct. This is the first process:

#include <boost/interprocess/ipc/message_queue.hpp>
#include <iostream>
#include <vector>

using namespace boost::interprocess;

int main ()
{
   BOOST_TRY{
      //Erase previous message queue
      message_queue::remove("message_queue");

      //Create a message_queue.
      message_queue mq
         (create_only               //only create
         ,"message_queue"           //name
         ,100                       //max message number
         ,sizeof(int)               //max message size
         );

      //Send 100 numbers
      for(int i = 0; i < 100; ++i){
         mq.send(&i, sizeof(i), 0);
      }
   }
   BOOST_CATCH(interprocess_exception &ex){
      std::cout << ex.what() << std::endl;
      return 1;
   } BOOST_CATCH_END

   return 0;
}

This is the second process:

#include <boost/interprocess/ipc/message_queue.hpp>
#include <iostream>
#include <vector>

using namespace boost::interprocess;

int main ()
{
   BOOST_TRY{
      //Open a message queue.
      message_queue mq
         (open_only        //only open
         ,"message_queue"  //name
         );

      unsigned int priority;
      message_queue::size_type recvd_size;

      //Receive 100 numbers
      for(int i = 0; i < 100; ++i){
         int number;
         mq.receive(&number, sizeof(number), recvd_size, priority);
         if(number != i || recvd_size != sizeof(number))
            return 1;
      }
   }
   BOOST_CATCH(interprocess_exception &ex){
      message_queue::remove("message_queue");
      std::cout << ex.what() << std::endl;
      return 1;
   } BOOST_CATCH_END
   message_queue::remove("message_queue");
   return 0;
}

To know more about this class and all its operations, please see the message_queue class reference.