QQuaternion Class

Member Function Documentation

[constexpr noexcept] QQuaternion::QQuaternion()

Constructs an identity quaternion (1, 0, 0, 0), i.e. with the vector (0, 0, 0) and scalar 1.

[constexpr noexcept] QQuaternion::QQuaternion(float scalar, float xpos, float ypos, float zpos)

Constructs a quaternion with the vector (xpos, ypos, zpos) and scalar.

[constexpr noexcept] QQuaternion::QQuaternion(float scalar, const QVector3D &vector)

Constructs a quaternion vector from the specified vector and scalar.

See also vector() and scalar().

[explicit constexpr noexcept] QQuaternion::QQuaternion(const QVector4D &vector)

Constructs a quaternion from the components of vector.

[constexpr noexcept] QQuaternion QQuaternion::conjugated() const

Returns the conjugate of this quaternion, which is (-x, -y, -z, scalar).

[static constexpr noexcept] float QQuaternion::dotProduct(const QQuaternion &q1, const QQuaternion &q2)

Returns the dot product of q1 and q2.

See also length().

[static] QQuaternion QQuaternion::fromAxes(const QVector3D &xAxis, const QVector3D &yAxis, const QVector3D &zAxis)

Constructs the quaternion using 3 axes (xAxis, yAxis, zAxis).

See also getAxes() and fromRotationMatrix().

[static] QQuaternion QQuaternion::fromAxisAndAngle(const QVector3D &axis, float angle)

Creates a normalized quaternion that corresponds to rotating through angle degrees about the specified 3D axis.

See also getAxisAndAngle().

[static] QQuaternion QQuaternion::fromAxisAndAngle(float x, float y, float z, float angle)

Creates a normalized quaternion that corresponds to rotating through angle degrees about the 3D axis (x, y, z).

See also getAxisAndAngle().

[static] QQuaternion QQuaternion::fromDirection(const QVector3D &direction, const QVector3D &up)

Constructs the quaternion using specified forward direction direction and upward direction up. If the upward direction was not specified or the forward and upward vectors are collinear, a new orthonormal upward direction will be generated.

See also fromAxes() and rotationTo().

[static] QQuaternion QQuaternion::fromEulerAngles(float pitch, float yaw, float roll)

Creates a quaternion that corresponds to a rotation of roll degrees around the z axis, pitch degrees around the x axis, and yaw degrees around the y axis (in that order).

See also getEulerAngles().

[static] QQuaternion QQuaternion::fromEulerAngles(const QVector3D &eulerAngles)

This is an overloaded function.

Creates a quaternion that corresponds to a rotation of eulerAngles: eulerAngles.z() degrees around the z axis, eulerAngles.x() degrees around the x axis, and eulerAngles.y() degrees around the y axis (in that order).

See also toEulerAngles().

[static] QQuaternion QQuaternion::fromRotationMatrix(const QMatrix3x3 &rot3x3)

Creates a quaternion that corresponds to a rotation matrix rot3x3.

See also toRotationMatrix() and fromAxes().

void QQuaternion::getAxes(QVector3D *xAxis, QVector3D *yAxis, QVector3D *zAxis) const

Returns the 3 orthonormal axes (xAxis, yAxis, zAxis) defining the quaternion.

See also fromAxes() and toRotationMatrix().

void QQuaternion::getAxisAndAngle(float *x, float *y, float *z, float *angle) const

Extracts a 3D axis (x, y, z) and a rotating angle angle (in degrees) that corresponds to this quaternion.

See also fromAxisAndAngle().

void QQuaternion::getAxisAndAngle(QVector3D *axis, float *angle) const

This is an overloaded function.

Extracts a 3D axis axis and a rotating angle angle (in degrees) that corresponds to this quaternion.

See also fromAxisAndAngle().

void QQuaternion::getEulerAngles(float *pitch, float *yaw, float *roll) const

Calculates roll, pitch, and yaw Euler angles (in degrees) that corresponds to this quaternion.

See also fromEulerAngles().

[constexpr noexcept] QQuaternion QQuaternion::inverted() const

Returns the inverse of this quaternion. If this quaternion is null, then a null quaternion is returned.

See also isNull() and length().

[constexpr noexcept] bool QQuaternion::isIdentity() const

Returns true if the x, y, and z components of this quaternion are set to 0.0, and the scalar component is set to 1.0; otherwise returns false.

[constexpr noexcept] bool QQuaternion::isNull() const

Returns true if the x, y, z, and scalar components of this quaternion are set to 0.0; otherwise returns false.

float QQuaternion::length() const

Returns the length of the quaternion. This is also called the "norm".

See also lengthSquared(), normalized(), and dotProduct().

float QQuaternion::lengthSquared() const

Returns the squared length of the quaternion.

See also length() and dotProduct().

[static] QQuaternion QQuaternion::nlerp(const QQuaternion &q1, const QQuaternion &q2, float t)

Interpolates along the shortest linear path between the rotational positions q1 and q2. The value t should be between 0 and 1, indicating the distance to travel between q1 and q2. The result will be normalized().

If t is less than or equal to 0, then q1 will be returned. If t is greater than or equal to 1, then q2 will be returned.

The nlerp() function is typically faster than slerp() and will give approximate results to spherical interpolation that are good enough for some applications.

See also slerp().

void QQuaternion::normalize()

Normalizes the current quaternion in place. Nothing happens if this is a null quaternion or the length of the quaternion is very close to 1.

See also length() and normalized().

QQuaternion QQuaternion::normalized() const

Returns the normalized unit form of this quaternion.

If this quaternion is null, then a null quaternion is returned. If the length of the quaternion is very close to 1, then the quaternion will be returned as-is. Otherwise the normalized form of the quaternion of length 1 will be returned.

See also normalize(), length(), and dotProduct().

QVector3D QQuaternion::rotatedVector(const QVector3D &vector) const

Rotates vector with this quaternion to produce a new vector in 3D space. The following code:

 QVector3D result = q.rotatedVector(vector);

is equivalent to the following:

 QVector3D result = (q * QQuaternion(0, vector) * q.conjugated()).vector();

[static] QQuaternion QQuaternion::rotationTo(const QVector3D &from, const QVector3D &to)

Returns the shortest arc quaternion to rotate from the direction described by the vector from to the direction described by the vector to.

See also fromDirection().

[constexpr noexcept] float QQuaternion::scalar() const

Returns the scalar component of this quaternion.

See also setScalar(), x(), y(), and z().

[constexpr noexcept] void QQuaternion::setScalar(float scalar)

Sets the scalar component of this quaternion to scalar.

See also scalar(), setX(), setY(), and setZ().

[constexpr noexcept] void QQuaternion::setVector(const QVector3D &vector)

Sets the vector component of this quaternion to vector.

See also vector() and setScalar().

[constexpr noexcept] void QQuaternion::setVector(float x, float y, float z)

Sets the vector component of this quaternion to (x, y, z).

See also vector() and setScalar().

[constexpr noexcept] void QQuaternion::setX(float x)

Sets the x coordinate of this quaternion's vector to the given x coordinate.

See also x(), setY(), setZ(), and setScalar().

[constexpr noexcept] void QQuaternion::setY(float y)

Sets the y coordinate of this quaternion's vector to the given y coordinate.

See also y(), setX(), setZ(), and setScalar().

[constexpr noexcept] void QQuaternion::setZ(float z)

Sets the z coordinate of this quaternion's vector to the given z coordinate.

See also z(), setX(), setY(), and setScalar().

[static] QQuaternion QQuaternion::slerp(const QQuaternion &q1, const QQuaternion &q2, float t)

Interpolates along the shortest spherical path between the rotational positions q1 and q2. The value t should be between 0 and 1, indicating the spherical distance to travel between q1 and q2.

If t is less than or equal to 0, then q1 will be returned. If t is greater than or equal to 1, then q2 will be returned.

See also nlerp().

QVector3D QQuaternion::toEulerAngles() const

This is an overloaded function.

Calculates roll, pitch, and yaw Euler angles (in degrees) that corresponds to this quaternion.

See also fromEulerAngles().

QMatrix3x3 QQuaternion::toRotationMatrix() const

Creates a rotation matrix that corresponds to this quaternion.

See also fromRotationMatrix() and getAxes().

[constexpr noexcept] QVector4D QQuaternion::toVector4D() const

Returns this quaternion as a 4D vector.

[constexpr noexcept] QVector3D QQuaternion::vector() const

Returns the vector component of this quaternion.

See also setVector() and scalar().

[constexpr noexcept] float QQuaternion::x() const

Returns the x coordinate of this quaternion's vector.

See also setX(), y(), z(), and scalar().

[constexpr noexcept] float QQuaternion::y() const

Returns the y coordinate of this quaternion's vector.

See also setY(), x(), z(), and scalar().

[constexpr noexcept] float QQuaternion::z() const

Returns the z coordinate of this quaternion's vector.

See also setZ(), x(), y(), and scalar().

QVariant QQuaternion::operator QVariant() const

Returns the quaternion as a QVariant.

[constexpr noexcept] QQuaternion &QQuaternion::operator*=(float factor)

Multiplies this quaternion's components by the given factor, and returns a reference to this quaternion.

See also operator/=().

[constexpr noexcept] QQuaternion &QQuaternion::operator*=(const QQuaternion &quaternion)

Multiplies this quaternion by quaternion and returns a reference to this quaternion.

[constexpr noexcept] QQuaternion &QQuaternion::operator+=(const QQuaternion &quaternion)

Adds the given quaternion to this quaternion and returns a reference to this quaternion.

See also operator-=().

[constexpr noexcept] QQuaternion &QQuaternion::operator-=(const QQuaternion &quaternion)

Subtracts the given quaternion from this quaternion and returns a reference to this quaternion.

See also operator+=().

[constexpr] QQuaternion &QQuaternion::operator/=(float divisor)

Divides this quaternion's components by the given divisor, and returns a reference to this quaternion.

See also operator*=().