Contents

TreeView QML Type

Provides a tree view to display data from a QAbstractItemModel. More...

Import Statement: import QtQuick
Since: Qt 6.3
Inherits:

TableView

Properties

Signals

Methods

Detailed Description

A TreeView has a model that defines the data to be displayed, and a delegate that defines how the data should be displayed.

TreeView inherits TableView. This means that even if the model has a parent-child tree structure, TreeView is internally using a proxy model that converts that structure into a flat table model that can be rendered by TableView. Each node in the tree ends up occupying one row in the table, where the first column renders the tree itself. By indenting each delegate item in that column according to its parent-child depth in the model, it will end up looking like a tree, even if it's technically still just a flat list of items.

To allow for maximum flexibility, TreeView itself will not position the delegate items into a tree structure. This burden is placed on the delegate. Qt Quick Controls offers a ready-made TreeViewDelegate that can be used for this, which has the advantage that it works out-of-the-box and renders a tree which follows the style of the platform where the application runs.

Even if TreeViewDelegate is customizable, there might be situations where you want to render the tree in a different way, or ensure that the delegate ends up as minimal as possible, perhaps for performance reasons. Creating your own delegate from scratch is easy, since TreeView offers a set of properties that can be used to position and render each node in the tree correctly.

An example of a custom delegate with an animating indicator is shown below:

 import QtQuick
 import QtQuick.Controls

 ApplicationWindow {
     width: 800
     height: 600
     visible: true

     TreeView {
         id: treeView
         anchors.fill: parent
         anchors.margins: 10
         clip: true

         selectionModel: ItemSelectionModel {}

         // The model needs to be a QAbstractItemModel
         // model: yourTreeModel

         delegate: Item {
             implicitWidth: padding + label.x + label.implicitWidth + padding
             implicitHeight: label.implicitHeight * 1.5

             readonly property real indentation: 20
             readonly property real padding: 5

             // Assigned to by TreeView:
             required property TreeView treeView
             required property bool isTreeNode
             required property bool expanded
             required property int hasChildren
             required property int depth
             required property int row
             required property int column
             required property bool current

             // Rotate indicator when expanded by the user
             // (requires TreeView to have a selectionModel)
             property Animation indicatorAnimation: NumberAnimation {
                 target: indicator
                 property: "rotation"
                 from: expanded ? 0 : 90
                 to: expanded ? 90 : 0
                 duration: 100
                 easing.type: Easing.OutQuart
             }
             TableView.onPooled: indicatorAnimation.complete()
             TableView.onReused: if (current) indicatorAnimation.start()
             onExpandedChanged: indicator.rotation = expanded ? 90 : 0

             Rectangle {
                 id: background
                 anchors.fill: parent
                 color: row === treeView.currentRow ? palette.highlight : "black"
                 opacity: (treeView.alternatingRows && row % 2 !== 0) ? 0.3 : 0.1
             }

             Label {
                 id: indicator
                 x: padding + (depth * indentation)
                 anchors.verticalCenter: parent.verticalCenter
                 visible: isTreeNode && hasChildren
                 text: "▶"

                 TapHandler {
                     onSingleTapped: {
                         let index = treeView.index(row, column)
                         treeView.selectionModel.setCurrentIndex(index, ItemSelectionModel.NoUpdate)
                         treeView.toggleExpanded(row)
                     }
                 }
             }

             Label {
                 id: label
                 x: padding + (isTreeNode ? (depth + 1) * indentation : 0)
                 anchors.verticalCenter: parent.verticalCenter
                 width: parent.width - padding - x
                 clip: true
                 text: model.display
             }
         }
     }
 }

The properties that are marked as required will be filled in by TreeView, and are similar to attached properties. By marking them as required, the delegate indirectly informs TreeView that it should take responsibility for assigning them values. The following required properties can be added to a delegate:

  • required property TreeView treeView - Points to the TreeView that contains the delegate item.
  • required property bool isTreeNode - Is true if the delegate item represents a node in the tree. Only one column in the view will be used to draw the tree, and therefore, only delegate items in that column will have this property set to true. A node in the tree should typically be indented according to its depth, and show an indicator if hasChildren is true. Delegate items in other columns will have this property set to false, and will show data from the remaining columns in the model (and typically not be indented).
  • required property bool expanded - Is true if the model item drawn by the delegate is expanded in the view.
  • required property bool hasChildren - Is true if the model item drawn by the delegate has children in the model.
  • required property int depth - Contains the depth of the model item drawn by the delegate. The depth of a model item is the same as the number of ancestors it has in the model.

See also Required Properties.

By default, TreeView toggles the expanded state of a row when you double tap on it. Since this is in conflict with double tapping to edit a cell, TreeView sets editTriggers to TableView.EditKeyPressed by default (which is different from TableView, which uses TableView.EditKeyPressed | TableView.DoubleTapped. If you change editTriggers to also contain TableView.DoubleTapped, toggling the expanded state with a double tap will be disabled.

Note: A TreeView only accepts a model that inherits QAbstractItemModel.

Property Documentation

rootIndex : QModelIndex [since 6.6]

This property holds the model index of the root item in the tree. By default, this is the same as the root index in the model, but you can set it to be a child index instead, to show only a branch of the tree. Set it to undefined to show the whole model.

This property was introduced in Qt 6.6.


Signal Documentation

collapsed(row, recursively)

This signal is emitted when a row is collapsed in the view. row will be equal to the argument given to the call that caused the collapse to happen (collapse() or collapseRecursively()). If the row was collapsed recursively, recursively will be true.

Note: when a row is collapsed recursively, the collapsed signal will only be emitted for that one row, and not for its descendants.

Note: The corresponding handler is onCollapsed.

See also expanded(), expand(), collapse(), and toggleExpanded().


expanded(row, depth)

This signal is emitted when a row is expanded in the view. row and depth will be equal to the arguments given to the call that caused the expansion to happen (expand() or expandRecursively()). In case of expand(), depth will always be 1. In case of expandToIndex(), depth will be the depth of the target index.

Note: when a row is expanded recursively, the expanded signal will only be emitted for that one row, and not for its descendants.

Note: The corresponding handler is onExpanded.

See also collapsed(), expand(), collapse(), and toggleExpanded().


Method Documentation

collapse(row)

Collapses the tree node at the given row in the view.

row should be the row in the view (table row), and not a row in the model.

Note: this function will not affect the model, only the visual representation in the view.

See also expand() and isExpanded().


[since 6.4] collapseRecursively(row = -1)

Collapses the tree node at the given row in the view recursively down to all leaves.

For a model has more than one root, you can also call this function with row equal to -1. This will collapse all roots. Hence, calling collapseRecursively(-1), or simply collapseRecursively(), will collapse all nodes in the model.

row should be the row in the view (table row), and not a row in the model.

Note: this function will not affect the model, only the visual representation in the view.

This method was introduced in Qt 6.4.

See also expandRecursively(), expand(), collapse(), isExpanded(), and depth().


int depth(row)

Returns the depth (the number of parents up to the root) of the given row.

row should be the row in the view (table row), and not a row in the model. If row is not between 0 and rows, the return value will be -1.

See also modelIndex().


expand(row)

Expands the tree node at the given row in the view.

row should be the row in the view (table row), and not a row in the model.

Note: this function will not affect the model, only the visual representation in the view.

See also collapse(), isExpanded(), and expandRecursively().


[since 6.4] expandRecursively(row = -1, depth = -1)

Expands the tree node at the given row in the view recursively down to depth. depth should be relative to the depth of row. If depth is -1, the tree will be expanded all the way down to all leaves.

For a model that has more than one root, you can also call this function with row equal to -1. This will expand all roots. Hence, calling expandRecursively(-1, -1), or simply expandRecursively(), will expand all nodes in the model.

row should be the row in the view (table row), and not a row in the model.

Note: This function will not try to fetch more data.

Note: This function will not affect the model, only the visual representation in the view.

Warning: If the model contains a large number of items, this function will take some time to execute.

This method was introduced in Qt 6.4.

See also collapseRecursively(), expand(), collapse(), isExpanded(), and depth().


[since 6.4] expandToIndex(QModelIndex index)

Expands the tree from the given model index, and recursively all the way up to the root. The result will be that the delegate item that represents index becomes visible in the view (unless it ends up outside the viewport). To ensure that the row ends up visible in the viewport, you can do:

 expandToIndex(index)
 forceLayout()
 positionViewAtRow(rowAtIndex(index), Qt.AlignVCenter)

This method was introduced in Qt 6.4.

See also expand() and expandRecursively().


bool isExpanded(row)

Returns if the given row in the view is shown as expanded.

row should be the row in the view (table row), and not a row in the model. If row is not between 0 and rows, the return value will be false.


toggleExpanded(row)

Toggles if the tree node at the given row should be expanded. This is a convenience for doing:

 if (isExpanded(row))
     collapse(row)
 else
     expand(row)

row should be the row in the view (table row), and not a row in the model.


© 2024 The Qt Company Ltd. Documentation contributions included herein are the copyrights of their respective owners.
The documentation provided herein is licensed under the terms of the GNU Free Documentation License version 1.3 as published by the Free Software Foundation.
Qt and respective logos are trademarks of The Qt Company Ltd. in Finland and/or other countries worldwide. All other trademarks are property of their respective owners.